Viva « 1-Component Waterborne Finishes « Loba On Top! - der Oberflächenspezialist für Parkett und Holzfußböden

Viva

Viva

 
Optimized Formula - Versatile and worldwide proven
Article No.: 11519

Waterborne 1-Component finish for wooden floors. For normal to heavy traffic residential areas and light commercial use. Excellent for renovation.
 

  • Excellent chemical and abrasion resistance
  • Very good resistance to black heel marks
  • Powerful resistance to plasticisers from parquet adhesives
  • Easy and safe application, no lap marks
  • Full “Connected Systems” approval
  • Low VOC content
  • Low emissions, certified to EMICODE® EC2


Range of use:
Suitable for parquet and hardwood floors. For normal to heavy traffic residential areas and light commercial use. Excellent for renovation due to powerful resistance to plasticizers from parquet adhesives.

 

Types of floors

Hardwood and Parquet

Certified with:

Connected SystemsDIBt-Z-157.10-19GEV-EMICODE EC2
Article No.Variant Container size
11519-322Viva - matt5 l
11519-332Viva - matt10 l
11519-122Viva - semi-gloss1l
11519-122Viva - semi-gloss5 l
11519-132Viva - semi-gloss10 l

Application

  • The surface must be sanded properly, wood moisture content max. 12%.
  • The floor must be dry and free from any old coatings, oil, grease, wax, silicone, sanding dust and other contaminants. Room temperature +15°C to +25°C, relative humidity 40% to 75%, material temperature +18°C to +25°C. Ensure working areas are adequately ventilated.
  • Transfer material to a LOBATOOL varnish bucket before applying.
  • Shake the contents well.
  • Observe the general and, if available, the product-specific health and safety instructions. More specific information relating to GISCODE can be found in the usage instructions, which are available at www.wingis-online.de.
  • This product is part of the LOBA and Wakol “Connected Systems”. The approved combinations with Wakol parquet adhesives may be found in the "Connected Systems Matrix": www.loba.de/connected-systems


Thinner
The product is supplied ready for use and must not be diluted!

Application tool/application rate
LOBATOOL roller Deluxe 120 / 100-120 ml(g)/m² = 8-10m²/l(kg)
LOBATOOL roller Microfaser 100-120 / 80-100 ml(g)/m² = 10-12m²/l(kg)

Intermediate sanding
Able to recoat without intermediate sanding within the first 24 hours. After this time, an intermediate sanding is necessary. An intermediate sanding before the last application will achieve an even finish. Use LOBATOOL perforated pad P120 or finer, alternatively Sanding Net P120 or finer. Carefully remove dust before overcoating.

Drying time

  • Earliest possible recoating after 4-6 hours.
  • Careful use possible after 4-6 hours.
  • Earliest possible intermediate sanding after 8-10 hours.
  • Light use after 24 hours.
  • Full use and covering possible after 5 days.
  • The floor can be covered earlier by using LOBATOOL Cover 400, for details see the TI for the product.


We recommend using a primer:
to minimise side bonding and to seal off wood constituents, e.g. in exotic timber.

  • WS EasyPrime.
  • OptiPrime.
  • PrimaSeal Plus (contains solvent).


Use on parquet and hardwood floors:

  • Prepare and prime the substrate properly.
  • Allow the primer to dry as specified.
  • Apply by roller.
  • Dry.
  • Intermediate sanding.
  • Apply second coating layer by roller.
 File nameLatest update
11519 Flyer Viva20-02-2019
 File nameLatest update
11519 Emicode WS Viva20-02-2019
 File nameLatest update
11519 LOBADUR Viva halbmatt matt 2018-11-2220-02-2019
 File nameLatest update
11519 Viva halbmatt semigloss20-02-2019
11519 Viva matt satin20-02-2019

Note on the use of cookies

In order to give you a better service this Website uses cookies. By continuing to browse the site you are agreeing to our use of cookies.

Data protection OK