• Remove any loose dirt and dust in advance using a vacuum, brush or mop.
• Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.
• Shake the contents well.

Thinner / Mixing

Water.

Application tool / application rate

LOBA Mop or Scrubber / add approx. 50 - 250 ml to 10 l water.

Application:

For regular cleaning and before applying DeckRefresh and WPC Refresh. Depending on the degree of soiling, mix approx. 50 - 250 ml of DeckCleaner with 10l of water. Apply cleaning solution to the surface and remove after a short exposure time with the LOBA mop. In case of grooved terrace decks or heavy soiling, treat the surface with a scrubbing brush. If necessary, repeat the cleaning process. Then rinse off any cleaning agent residues with clear water.
In case of high application concentration, a slight leaching may occur on oiled surfaces. In this case, we recommend a subsequent application of WPC Refresh on these surfaces after drying overnight to restore the impregnation. High application concentrations can lead to leaching of the oiled surfaces. To restore the impregnation, after drying overnight, LOBA WPC Refresh (light impregnating effect) or LOBA DeckOil (strong impregnating effect) can be applied.