DeckFinish Color Various colors

Contact DeckFinish Color Various colors | Loba

DeckFinish Color

- Various colors

Reaches the next level: The long-lasting UV light and weather protection for your terrace is here!

1C water-based finish for exterior wooden surfaces. This outdoor expert sets your terrace perfectly in scene: Whether in trendy gray or noble red-brown - extremely durable DeckFinish Color defies all weather conditions, is slip-resistant and chlorine-resistant. Thanks to its quick and easy application, the robust surface protection also reduces working time.

Properties

Deep protection against UV radiation, frost and moisture
Chlorine resistant
Easy and safe application
No roughening of the wood
Short drying time
Suitable for all types of wood
Suitable for smooth and grooved planks
Applicable in a system with LOBA DeckPrepare

Technical data sheets

DeckFinish Color Various colors

Further information

Range of use

Suitable for wooden terraces and decks in outdoor areas. Anti-slip as per DIN 51097 evaluation group A and DIN EN 16165:2021-12 evaluation group R10.

Art.-no.
11842-800145-22-000	Light brown	5 l	4	128
11842-800150-22-000	Dark brown	5 l	4	128
11842-800099-22-000	Red brown	5 l	4	128
11842-900148-22-000	Grey	5 l	4	128

Optimum processing conditions at +15°C to +25°C, relative humidity 40% to 75%, material temperature +15°C to +25°C
Do not apply to surfaces exposed to hot or strong sunlight, as the applied coating may dry too quickly. Do not apply if rain is expected within 3 hours of application.
If in doubt, create a test area to determine compatibility, adhesion and appearance. The results may vary depending on the type of wood, especially with oily, colour- intensive and resinous woods.
Shake the contents well.
Transfer material to a LOBA varnish bucket before applying.
Avoid drops falling on the surface, smooth out any drops directly with a brush.
Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.

Thinner / Mixing

The product is ready for use and must not be reduced!

Application tool / application rate

LOBA oil brush, soft brush / 100-120ml/m². Actual material consumption may vary depending on the type of wood, wood moisture and the weathering condition of the surface. With strongly weathered surfaces, a significantly higher material consumption must be expected.

Drying time

Overworking after 2-3 hours, within 24 hours.
Light use after drying overnight.
Full load capacity after 48 hours.

Preparation:

Initial treatment

Prepare the substrate according to the specifications for "old used decks" or "newly installed decks" in the technical information for the LOBA DeckDegrayer product.
Apply LOBA DeckPrepare according to the technical information.
Drying 1 hour. Wait for complete drying
Apply LOBA DeckFinish Color
Drying min. 2 hours
Apply the second layer of LOBA DeckFinish Color

Follow-up treatment

Basic cleaning with LOBA DeckDegrayer according to the technical information of the product, alternatively sand the surface with appropriate machine.
Apply LOBA DeckPrepare according to the technical information.
Drying 1 hour. Wait for complete drying
Apply LOBA DeckFinish Color
To maintain the visual value of the decking in the long term, we recommend an annual basic cleaning and recoating of the decking.

Suitable product combinations

Pre-Treatment

Recommended is the pre-treatment with LOBA DeckPrepare to optimize the adhesion properties and to counteract wood graying.

Consumption calculator

Area

m²

Consumption

= ?

Application device

Oilbrush (100 - 120 ml/m²)

Brush (100 - 120 ml/m²)