• The substrate must be firm, stable, non-slip and free of release agents. Soft or non-adherent layers must be removed and cracks must be closed with a force fit. The surface must be smooth, have a flatness according to DIN 18202 Tab. 3, line 4 and a uniform absorption behavior.
• Shake the contents well.
• Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.

Mix in:

• Shake up LOBA SlipResist and finish.
• In the case of 2K finishes, mix in before the hardener, so that it is possible to mix only the required material with the partial quantity measuring cup with hardener. Mass with additive has a storage stability of 14 days.
• Add one container of 100 g to 5 l/kg of finish.
• Attention: In order to ensure the decorative slide properties, the additive quantities must be exactly observed.
• Shake or stir in thoroughly (also possible by machine with a LOBA paint mixer).
• Process 2K finish mixed with LOBA SlipResist within the specified processing time. Longer stability is not guaranteed.
  

Suitability:

Suitable product combinations

Achieves slip resistance according to DIN EN 16165:2021-12

• 2K Supra A.T. satin
• 2K Supra A.T. semi-gloss
• 2K Duo extra-matte
• 2K Duo satin
• 2K Duo semi-gloss
• 2K Fusion satin
• 2K Fusion semi-gloss
• 2K Drive extra-matte
• EasyFinish satin
• EasyFinish semi-gloss
• EasyFinish Neo satin
• EasyFinish Neo semi-gloss
• Speed satin
• Speed semi-gloss
• 
  rating group R11 with the following finishes:
  2K UltraElastic extra-matte
• 2K InvisibleProtect
  To achieve an R11 surface with 2K InvisibleProtect in combination with SlipResist, a 3 coat application is required. The first coat can also be replaced by a primer.