• The surface must be professionally sanded. The floor must be dry and free of any old coatings, oil, grease, wax, silicone, sanding dust and other impurities.
• The optimal processing conditions are room temperature +15°C to + 25°C, floor temperature +15°C to +22°C, rel. humidity 40% - 65%, material temperature +18°C - + 25°C, max. wood moisture 12%, sufficiently ventilate working rooms.
• In order to prevent parquet damage, the room temperature should be set to the annual average expected for the use of the product.
• Transfer material to a LOBA varnish bucket before applying.
• Shake the contents well.
• The innate color of the wood used, its structure and its pore properties, as well as the fineness of the sanding pattern, also have a major impact on the color that can be achieved. We strongly recommend to produce a color sample on the original wood using site-appropriate sanding techniques to check the result by yourself and if necessary for approval by the project client.
• By subsequent impregnation inequalities of the surface / parquet- and wooden floors are generally intensified. In order to achieve a uniform appearance. A careful and homogenous pre treatment is necessary.
• Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.

Thinner / Mixing

The product is ready for use and must not be reduced!

Application tool / application rate

LOBA spray pump and Wischwiesel or LOBA roller Microfaser 100-120 as a wiper / approx. 100-120ml/m² (8-10m²/l). Buff down any wooden fibres that have arisen overnight after drying using a single-disc machine and LOBASAND SpecialPad green.

Drying time

• Dry overnight. Oil must be applied within 24 hours.

Wipe-on application

• Evenly wipe on PreTone using a LOBA roller Micro 100-120.
• Then equalise with the LOBA roller Micro 100-120 in the direction of the grain provided the first application has already soaked completely into the wood, applying additional material if so.
• Work in sections.
• Dry overnight.
• Smooth the surface using a single-disc machine with LOBASAND SpecialPad green underneath (break up any raised wood fibres) and then remove the sanding dust.
• Within 24 hours, impregnate the surface with the preferred shade of LOBA 2K ImpactOilColor or LOBA 2K IntensiveColor. Process as per the product's technical information.

Spray application:

On larger areas especially, the spray application with the LOBA spray can offers a considerable time saving while at the same time delivering an ergonomic way of working. The application with the spray device should be carried out by 2 people, since the material must be equalised immediately after spraying. On contiguous surfaces of more than 100 m2, 2 or more devices must be used.

• Before starting work, immediately adjacent areas such as doors, plint, etc., must be screened off using suitable masking tape.
• Hold the spray nozzle at a constant angle and distance from the surface as possible and spray PreTone evenly, lane by lane, at approx. 100-120 ml/m2. Once one lane has been sprayed, equalise it immediately with a LOBA Wischwiesel.
• Dry overnight.
• Smooth the surface using a single-disc machine with LOBASAND SpecialPad green underneath (break up any raised wood fibres) and then remove the sanding dust.
• Within 24 hours, impregnate the surface with the preferred shade of LOBA 2K ImpactOilColor or LOBA 2K IntensiveColor. Process as per the product's technical information.

Suitable product combinations

Suitable products for secondary impregnation:

• 2K Intensive Color
• 2K ImpactOil Color.