• The surface must be professionally sanded. The floor must be dry and free of any old coatings, oil, grease, wax, silicone, sanding dust and other impurities.
• The optimal processing conditions are room temperature +15°C to + 25°C, floor temperature +15°C to +22°C, rel. humidity 40% - 75%, material temperature +18°C - + 25°C, max. wood moisture 12%, sufficiently ventilate working rooms.
• In order to prevent parquet damage, the room temperature should be set to the annual average expected for the use of the product.
• To reduce the risk of excessive swelling, we recommend applying a maximum of 2 roll applications per day.
• Transfer material to a LOBA varnish bucket before applying.
• Stir the material well.
• Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.

Thinner / Mixing

The product is ready for use and must not be reduced!

Application tool / application rate

LOBA roller Universal 100 / 100 - 120 ml/m2 (8-10 m2/l).
LOBA roller Microfaser 100-120 / 80-100 ml/m² (10-12 m²/l).
Due to the reduced volume of application, the use of the roller Microfaser leads to less wood swelling.LOBA trowel / 1st application approx. 40 ml/m² (25m²/l), 2nd application approx. 20 ml/m² (50m²/l)

Drying time

• The earliest the floor can be varnished over in the case of roller applications is approx. 60 minutes and 30 minutes for trowel applications, but within 24 hours.
• If there are drying delays, wait until completely dry.

Intermediate sanding

Do not intermediate-sand the primer.If an adequate layer thickness is achieved (roller application, poorly absorbent substrate), the surface can be worked over with a single-disc machine and LOBASAND maroon pad underneath.Carefully remove dust before overcoating.

Application for parquet and wooden flooring:

• Prepare the substrate properly.
• Roller on the primer generously.
• Drying.
• Roll on LOBA Water-based finish.

Alternative application with trowel:

Do not use on orchard, colored, coniferous or tropical types of wood, chemically or thermally treated wood, worn-out old flooring, flooring with gaps or sports parquet flooring

• Prepare the substrate appropriately.
• Trowel on EasyPrime.
• Drying.
• Trowel on EasyPrime (following the cross-wise pattern).
• Drying.
• Roll on LOBA Water-based finish.

Suitable product combinations

Suitable finishes:

Normal traffic:

• Life.
  

Up to heavy traffic:

• Viva.
• EasyFinish.
  

Up to very heavy traffic:

• 2K Fusion.
• 2K Duo.
• 2K Supra A.T..
• 2K UltraSport.
• 2K InvisibleProtect.
• Rush.