• The surface must be professionally sanded. The floor must be dry and free of any old coatings, oil, grease, wax, silicone, sanding dust and other impurities.
• The optimal processing conditions are room temperature +15°C to + 25°C, floor temperature +15°C to +22°C, rel. humidity 40% to 75%, material temperature +18°C to + 25°C, max. wood moisture 12%, sufficiently ventilate working rooms.
• In order to prevent parquet damage, the room temperature should be set to the annual average expected for the use of the product.
• To reduce the risk of excessive swelling, we recommend applying a maximum of 2 roll applications per day.
• Transfer material to a LOBA varnish bucket before applying.
• Stir the material well.
• Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.

Thinner / Mixing

Application tool / application rate

Drying time

• Do not varnish over before approx. 60 minutes have elapsed.
• If there are drying delays, wait until completely dry.

Intermediate sanding

Application for parquet and wooden flooring:

• Prepare the substrate properly.
• Roller on the primer generously.
• Drying.
• Roll on LOBA Water-based finish.

Suitable product combinations

Suitable finishes:

Normal traffic:

• Life.
  

Up to heavy traffic:

• EasyFinish.
• Viva.
  

Up to very heavy traffic:

• 2K Supra A.T..
• 2K Duo.
• 2K Fusion