• Shake component A, add to component B at a ratio of 10:1 while slowly mechanically stirring for example with the LOBA Paint mixer. Can be used for 2 hours after mixing.
• The surface must be professionally sanded. The floor must be dry and free of any old coatings, oil, grease, wax, silicone, sanding dust and other impurities.
• The optimal processing conditions are room temperature +15°C to + 25°C, floor temperature +15°C to +22°C, rel. humidity 40% - 75%, material temperature +18°C - + 25°C, max. wood moisture 12%, sufficiently ventilate working rooms.
• In order to prevent parquet damage, the room temperature should be set to the annual average expected for the use of the product.
• To reduce the risk of excessive swelling, we recommend applying a maximum of 2 roll applications per day.
• Transfer material to a LOBA varnish bucket before applying.
• Shake the contents well.
• Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.

Thinner / Mixing

Application tool / application rate

Drying time

• Earliest possible overcoating after 12 hours.
• However within 24 hours.

Setup with natural wood coloring:

• Prepare the substrate properly and prime with LOBA EasyPrime.
• Drying of the primer as per the technical information.
• Roll on Sealer FR.
• Dry overnight, maximum 24 hours.
• Roll on Sealer FR. Dry overnight.
• Intermediate sanding with the LOBASAND perforated pad P120 or finer.
• Trowel on LOBA TopGel.
• Roll on LOBA 2K Duo (with the exception of the shiny setting, all variations are possible).