• The surface must be professionally sanded. The floor must be dry and free of any old coatings, oil, grease, wax, silicone, sanding dust and other impurities.
• The optimal processing conditions are room temperature +15°C to + 25°C, floor temperature +15°C to +22°C, rel. humidity 40% - 75%, material temperature +18°C - + 25°C, max. wood moisture 12%, sufficiently ventilate working rooms.
• In order to prevent parquet damage, the room temperature should be set to the annual average expected for the use of the product.
• Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.

Thinner / Mixing

The product is ready for use and must not be reduced!

Application tool / application rate

LOBA trowel / approx. 20g/m² (50m²/kg).

Drying time

• Earliest possible overcoating after 30 minutes.
• If there are drying delays, wait until completely dry.

Application for parquet and wooden flooring:

• Prepare the substrate properly, prime it and apply LOBA Water-based finish.
• Drying, intermediate sanding.
• Carefully apply TopGel with the LOBA trowel.
• After drying, roller on LOBA Water-based finish.

Suitable product combinations

Suitable finishes:

can be used in combination with all LOBA finishes in matt, semi-matt and extra-matt finishes.
Do not use with gloss systems.