• Shake the contents well.
• Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.

Thinner / Mixing

The product is ready for use and must not be reduced!

Application tool / application rate

LOBA spray can, trowel or cloth / 10-20 ml/m² (50-100m²/l) polish up manually or by machine after drying for example with LOBASAND NormalPad white.

Drying time

• Approx. 60 min.

Application:

Newly laid multi-layer elements

freshly oiled and waxed flooring, as well as flooring impregnated with hard wax/oil, should be cleaned until it is dust-free (brush, vacuum). Apply NatureWax in an even, thin layer with a lint-free cloth or sponge and then polish when dry.
Clean flooring with sticky soiling using a damp mop and LOBA ParkettSoap. Once completely dry, apply NatureWax and polish.

Worn floors with traces of use

can be prepared with a thorough cleaning using LOBA Cleaner or LOBA ParkettSoap, and if necessary with mechanical equalisation using a slightly abrasive LOBASAND SpecialPad (beige/green). Once completely dry, apply NatureWax and polish.

Larger areas

can be treated using the SprayCleaner method. Apply NatureWax by spraying it on and equalising it by machine (single-disc machine with LOBASAND SpecialPad white).