• Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.
• Shake the contents well.

Thinner / Mixing

The product is ready for use and must not be reduced!

Application tool / application rate

LOBA trowel or cloth / 10-30 ml/m² (30-100m²/l) depending on the absorbency of the substrate. Equalise with LOBASAND SpecialPad beige.

Drying time

• Equalise after 30-60 min.
• Careful use possible after 4-6 hours.
• Full traffic capability and coverage after 12 hours.

Application:

ParkettOil Deluxe can only be used on absorbent substrates, e.g. badly worn-out flooring or after intensive cleaning. Mechanical equalisation is absolutely essential.

Worn floors with traces of use

can be prepared with a thorough cleaning using LOBA Cleaner or LOBA ParkettSoap, and if necessary with mechanical equalisation using slightly abrasive pads (beige/green). Once completely dry, apply ParkettOil Deluxe and leave on for around 30-60 minutes. The equalise the entire surface using a single-disc machine with a LOBASAND SpecialPad beige underneath.

Larger areas

Put ParkettOil Deluxe directly on a LOBASAND Special-Pad beige. Rub in the oil supported by a single disc machine. Let work for approx. 20 min. Even out surface with a single-disc machine and LOBASAND Special-Pad beige.

Important information

Keep soaked cloths, pads and other tools in closed containers. Moisten oil in combination with sanding dust, fabric cloths and so on with water or store in a sealable bucket and dispose of in a fire-safe manner, since otherwise there is a risk of self-ignition.